SSangyong Immobiliser Off Services

At ECU Tuning Services, we have the latest Ssangyong ECU tuning software to safely read, modify and write the new immobiliser off software to your existing ECU without having to go down the path of a full new ECU replacement from the dealers.

ECU Tuning Services have been trusted by many of the Ssangyong dealerships, workshops and the public from around the country, having carried out hundreds of repairs our Ssangyong immobiliser delete services are a safe and reliable way to fix this common Ssangyong fault saving you a tonne of money compared to a brand new ECU.

Common Supported Delphi Ssangyong ECU Models: (Shown on the ECU Sticker)

• Delphi DCM3.2AP
• DCM3.7AP
• DCM6.2AP
• HCF32
  
  

ECU Tuning Services do not write a generic immobiliser delete file to your ECU, these can cause more fault then before and have the incorrect injector settings etc instead we read the original file with specialized equipment and have the proper software to convert your existing data to a non immobiliser data retaining all of your other computers important information to prevent future faults down the track, generic files can have different set ups/programming causing further issues.

Important Steps: 

1. Remove & courier the ECU to us - Located under floor cover/panel passengers side front footwell
2. Before plugging in newly modified ECU you must disconnect the ignition antenna otherwise the immobiliser system will turn back on on the same fault will still be there!
3. Tape over the antenna plug and and note "Do Not Plug In" incase someone own the track finds and plugs back in
4. All fault codes in the ECU will be cleared and bench tested before sending back. Very few vehicles have require you leave vehicle running for 20 minutes for the ECU to reconfigure settings or if you have diagnostic programmers clear the fault codes and your off again straight away.